Acrylic Anti-Slip Concrete Sealer
Model IC-SOLAcrylic Anti-Slip Coating for Exterior Surfaces
IC-SOL is a one-component acrylic coating designed for outdoor concrete or asphalt surfaces requiring slip resistance. It provides a textured, anti-slip finish available in a variety of colors. This water-based product is low odor and fast-drying. Offered in four solids variants (10%, 20%, 30%, 50%) — specs below reflect the highest (50%) solids variant; ask us for the breakdown on the lighter-duty variants.
- Packaging
- 3.78 L (1 gal), 18.9 L (5 gal)
- VOC
- < 50 g/L
- Coverage
- ± 200 ft²/gal
- Application Temperature
- 10°C-30°C (50°F-86°F)
Key Features
- •Anti-slip finish for enhanced safety
- •Easy to apply by roller or brush
- •Fast drying with low odor
- •Water-based and solvent-free
- •Good abrasion and weather resistance
Mixing & Application
Stir well before use. Apply between 10°C and 30°C (50°F–86°F). Avoid direct sun and rainy conditions. Use a textured roller or brush; apply 1 to 2 coats, waiting 4–6 hrs between coats depending on conditions.
Data Note
iCoat's product name implies four solids variants (10%, 20%, 30%, 50%), but the page provides only a single consolidated spec table (as shown above) with no differentiated per-variant data — confirmed across multiple independent re-checks of the source page. Contact PolyPro for variant-specific guidance.
Talk to the lab before you order.
Full data sheets, SDS, and coverage calculations for IC-SOL — call or email and we'll get you what you need within one business day.
