Flowfill Polyurea Crack Filler
Model FLOWFILLPolyurea Crack Filler
FLOWFILL is a two-component, solventborne polyurethane system with high penetration and fast-setting capabilities for quick repair of damaged joints, spalling, and cracks. Fillers such as sand or gravel can be added for repairing larger holes and defects. It offers self-leveling and self-priming properties with excellent adhesion and is ready for service in 10-20 minutes.
- Packaging
- 7.56 L (2 US gal), 37.8 L (10 US gal)
- VOC
- 397 g/L
- Application Temperature
- 10°C to 30°C (50°F-86°F)
Key Features
- •Hand-mixable in small quantities (250 mL to 1 L)
- •Cures within 10 minutes at 22°C (72°F)
- •Easy 1:1 mix ratio by volume
- •Self-leveling and self-priming
- •High chemical resistance
- •Performs well under forklift traffic and harsh conditions
- •Ready for service in 10-20 minutes
Mixing & Application
Old concrete must be mechanically prepared (shot blasting, sand blasting, or diamond grinding); remove all contaminants (oils, sealers, curing agents, waxes, grease). Mix each component separately, then pour Part B into Part A at the proper ratio and mix for no more than 20 seconds. Pour the mixed material onto the prepared surface within 20 minutes of mixing. Clean tools with aromatic naphtha or xylene; once cured, material can only be removed mechanically. Avoid exterior use on ground-level substrates.
Talk to the lab before you order.
Full data sheets, SDS, and coverage calculations for FLOWFILL — call or email and we'll get you what you need within one business day.
